Design and Implementation of Multi-Protocol Data Networks Interface Detector in Heterogeneous IoTs

Date

2020-02

Journal Title

Journal ISSN

Volume Title

Publisher

Institute of Electrical and Electronics Engineers Inc.

Abstract

In Internet of Everything (IoE) or heterogeneous IoTs, there exist a plethora of protocols and inter-connected Internet of Things. For every network protocol, the complexity of communication and wiring at the physical interface becomes more and more challenging. In this work, an automated interface detector (or gateway) is proposed using a novel port, that scans the physical layer parameters, interpolates with Electronic Industry Association/Telecommunication Industry Association (EIA/TIA) standards specification parameters and compares packet format initiates communication. In this approach, line impedance, voltage, current, SNR, power, and network capacity are used as the coefficients of merit for physical layer detection by interpolation and averaging methods. Standard packet architectures are the key parameters for communication initiation and network fastening at both ends of the data line. The serial protocols such as CANopen, Ethernet, UART, I2C, and SPI are tested and verified. Results have shown that the proposed system can detect any physical layer interface and initiate a data network regardless of connector pinouts and interface wiring complexities. The implementation results exhibit a fertile resource for redundancy handling in-line parameters of data networks. © 2020 IEEE.

Description

This conference paper is not available at CUD collection. The version of scholarly record of this conference paper is published in 2020 IEEE International Conference on Informatics, IoT, and Enabling Technologies (ICIoT) (2020), available online at: https://doi.org/10.1109/ICIoT48696.2020.9089435

Keywords

EIA/TI, Aheterogeneous, Interface, IoE, IoT, multi-protocolpacket, Electronics industry, Gateways (computer networks), Internet protocols, Physical layer, Connector pinouts, Design and implementations, Electronic industries, Industry association, Layer parameters, Packet architecture, Physical interface, Specification parameters, Internet of things

Citation

Tariq, H., Abdaoui, A., Touati, F., Al-Hitmi, M. A. E., Crescini, D., & Manouer, A. B. (2020, February). Design and Implementation of Multi-Protocol Data Networks Interface Detector in Heterogeneous IoTs. In 2020 IEEE International Conference on Informatics, IoT, and Enabling Technologies (ICIoT) (pp. 563-569). https://doi.org/10.1109/ICIoT48696.2020.9089435

DOI